| | Searching Current Courses For Fall 2016 |
| |
Course: |
WEL 122
|
|
| |
Title: | Structural Welding II |
|
| |
Long Title: | Structural Welding II |
|
| |
Course Description: | Continues WEL 121 with final emphasis toward AWS welder qualification with mild steel electrode E-7018 qualification test in the 2G, 3GU, and 4G position. |
|
| |
Min Credit: | 3 |
|
| |
Max Credit: | |
REQUIRED COURSE LEARNING OUTCOMES:
1. Weld a Tee Joint in the vertical position using E-7018.125 Diameter Stringers.
2. Weld a Tee Joint Weave in the vertical position using E-7018.125 Diameter Stringers.
3. Weld Outside Corner Joint in the vertical position using E-6010 for the Root Pass and E-7018 for Fill and Cover Passes.
4. Weld a Tee Joint in the Overhead position using E-7018.125 Diameter Electrode.
5. Weld an outside Corner Joint using E-7018.125 Diameter Electrode.
6. Weld a V groove plate test in the vertical position using E-7018.125 Diameter Electrode.
7. Weld a V groove plate test in the Overhead position using E-7018.125 Diameter Electrode.
8. Pass a plate test in the vertical and overhead position using E-7018.125 Diameter Electrode.
9. Pass a A. W. S. D. 1.1 Structural Plate test in the vertical and overhead position.
REQUIRED TOPICAL OUTLINE:
I. Follow Safety Manuals / Safety Regulations / Safety Requirements
II. Welding Tee-joints using E6010 All Positions.
III. Welding Lap-joints using E6010 All Positions.
IV. Single Vee-Groove E6010 Flat Position.
V. Welding Tee-joints using E7018 All Positions.
VI. Welding Lap-joints using E7018 All Positions.
VII. Single Vee-Groove E7018 Flat Position.
| |
Pikes Peak State College |
PPCC |
Skip to top of page
